Page 1 of 1
Flashing HPLC with NaOH 0.1M
Posted: Fri Oct 31, 2008 12:01 pm
by marina1111
Hello!
Can I flash my HPLC system (Waters) with NaOH 0.1M? Without the column of course.
Thank you
Posted: Fri Oct 31, 2008 12:12 pm
by AA
I am not sure if you can flash it or not, but you can certainly flush it with sodium hydroxide without issue. If you are ever in doubt of what you can or can not pump through the system, check the users guide, there is a solvent compatibility table in the guide.
Posted: Sun Nov 02, 2008 6:52 am
by marina1111
Thank you! Excuse my English