Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

GPC Mass Recovery

http://www.chromforum.org/viewtopic.php?t=8719

Page 1 of 1

GPC Mass Recovery

Posted: Mon Jun 30, 2008 6:26 pm
by Jaries
How do you calculate % Mass recovery on GPC. We are running polyethylene oxide through out GPC columns and i want to make sure everything is coming out and not getting stuck to the columns.

Thank you very much for all the help

Posted: Wed Jul 02, 2008 8:39 am
by HW Mueller
Probably the simplest way to do this is to take out the column, inject and detect a standard at the flowrate used to run the column. The areas should be the same as if the column was involved.
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/