Page 1 of 1
second hand lc/ms
Posted: Mon Mar 10, 2014 7:28 pm
by jiangds06
interested in agilent 1100 with MSD. How much is this unit usually cost and what weigh most for your decision making?
Re: second hand lc/ms
Posted: Fri Jul 25, 2014 6:38 pm
by dr_bahram1977
1100 MSD could be found on Ebay
price could be from 10K to 30K.
first, lets know your needs, then I could help you by select.
Re: second hand lc/ms
Posted: Mon Jul 28, 2014 9:27 am
by CE Instruments
Aigilent will sell you a new LC/MSD for £30K
Re: second hand lc/ms
Posted: Mon Jul 28, 2014 2:27 pm
by carlo.annaratone
30k seems a bit low for a new instrument...
Re: second hand lc/ms
Posted: Wed Nov 26, 2014 7:17 pm
by dr_bahram1977
As far as I know, used single quadrupole for Agilent are about 100K.
http://www.ebay.com/itm/Agilent-6120B-S ... 417ed0eb87
Re: second hand lc/ms
Posted: Mon Dec 15, 2014 6:53 pm
by Dimitri
You're honestly looking at around $30k to $40k US for a used Agiulent/HP 1100 LC/MSD system. The 1200, which has already been pointed out, will run you around $100k US.
I would suggest against e-bay though, no guarantee or warranty for the products you buy and I have been burned a few times. Try some of the used equipment dealers, there are lots of them and they usually at least a few of them will have an 1100 or two.
Re: second hand lc/ms
Posted: Mon Dec 15, 2014 9:55 pm
by James_Ball
Check out this one for used/refurbished Mass Specs
http://www.mckscientific.com/
Re: second hand lc/ms
Posted: Sat Mar 07, 2015 8:08 pm
by mckrause
We paid $25000 for our 1100MSD refurbished (no HPLC); it has been a workhorse. I did NOT buy it off of eBay because I wasn't sure what I was doing. Now that I know the instrument I would not be scared to get another one off of eBay, but I am very good at fixing and maintaining instrumentation. If you get it off of eBay you'd better be able to fix it.