Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Running LC/MS chemstation without the MS turned on

http://www.chromforum.org/viewtopic.php?t=17096

Page 1 of 1

Running LC/MS chemstation without the MS turned on

Posted: Mon Jul 11, 2011 3:37 am
by trobs
Hi Everyone

I have an ion trap and UV detector running on chemstation and want to run a method using only the UV with the MS detector turned off.

If I turn on chemstation with the ion trap turned off it displays an error and wont let me load do anything. Does anyone know a way to remove the MS from chemstation temporarily and just run a UV method?

Thanks

Stephen

Re: Running LC/MS chemstation without the MS turned on

Posted: Mon Jul 11, 2011 9:45 am
by Bluesman75
Not sure if this will work for your setup but worth a try: http://www.chem.agilent.com/en-US/Suppo ... 00213.aspx
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/