ICS 3000
Posted: Sat Mar 26, 2011 12:15 pm
Hii
I am useing ICS 3000 Dionex,
what is the best way to do calibration for bromate
I am useing ICS 3000 Dionex,
what is the best way to do calibration for bromate
There are a couple of norms around e.g. USEPA Method 300.1.
From that method or others you get information how to prepare stock solutions;
"7.3.2 Bromate (BrO3-) 1000 mg/L: Dissolve 0.1180 g of sodium bromate
(NaBrO3, CASRN 7789-38-0) in reagent water and dilute to 100 mL in a
volumetric flask."
These then can be diluted to the concentration required. Better would be to use certified standard solutions if available.