Page 1 of 1
new gc/fid
Posted: Tue Jun 09, 2009 10:37 pm
by vestelshirley
Am wanting to replace a 5890(ii) with 7673 autosampler and fid and ecd detectors...have about 35 to 40 k to spend. Any suggestions?
prefer electronic pressure control and 1c/min oven and possibly cryogenics adaptability.
Posted: Wed Jun 10, 2009 3:08 pm
by AICMM
Vestelshirley,
I would do two things. One, I would contact vendors and ask if they have demo units or returns. Two, I would contact reputable after-market vendors with your requirements. I suspect you can find such a deal if you are willing to take a re-conditioned instrument that is a year or two old. I have been quoted very good prices on re-conditioned 6890 for a customer of mine.
Best regards.
Posted: Fri Jun 12, 2009 2:28 pm
by Ron
Call all the major GC manufacturers and ask for a quotation on the configuration you are interested in. You can probably get a brand new system with electronic flow control, autosampler, and data system for $40K.