Chromatography Forum

Hi,

We have some older HPLC equipment in our laboratory (we are an academic research group). One system has the following components:

SSI 222C pump
SSI 232C gradient
Shimadzu RF-10AXL fluorescence detector

The other system has the following components:

Shimadzu RF-551 spectrofluorometric detector
Shimadzu SPD-5AV UV-Visibile detector
HP Series 1050 pump

We are looking for a system that can accomodate this instrumentation for use with Windows XP, Vista, or MacOS X (Windows preferred), along the lines of eDaq PowerChrom system (software + box to drive instrument): http://www.edaq.com/powerchromsystems.html. Are there similar systems available? Which is the best? The most cost effective?

Recommendations are appreciated.

Thanks,
Aaron

Most any modern system will be able to take a 1V analog signal via A/D converter, so as long as you have the needed controllers, you should be able to use what you have.

Thanks. Does anyone have any recommendations for A/D converters, in particular, one that has a USB connection?

Thanks,
Aaron

You can consider our Clarity software with U-PAD2 A/D converter (2 channel, USB connection). Details and distributors can be found on our web pages www.dataapex.com.

Details and distributors can be found on our web pages www.dataapex.com.

Software company representative should pay more attention on details

correct link is http://www.dataapex.com

Thank you for correction, dblux_