Page 1 of 1
CP-4900 Micro GC Software
Posted: Mon May 13, 2019 9:00 am
by marc00polo
I have a CP-4900 Varian Micro-GC and want to do some gas analysis. Unfortunately, the software has some critical problems and will not load methods/sample lists without crashing.
Does anybody know where I can download new software compatible with the CP-4900 that provides all the functions required to complete basic gas analysis (e.g. method/sample lists/data processing/results etc.).
Many thanks
Marc
Re: CP-4900 Micro GC Software
Posted: Mon May 27, 2019 7:26 am
by varossf
Marc,
the CP-4900 is supported by OpenLab EZChrom and can be obtained from your local Agilent office.
Re: CP-4900 Micro GC Software
Posted: Mon Jun 24, 2019 2:32 pm
by Henrylozano
I have a CP-4900 Varian Micro-GC and want to do some gas analysis. Unfortunately, the software has some critical problems and will not load methods/sample lists without crashing.
Does anybody know where I can download new software compatible with the CP-4900 that provides all the functions required to complete basic gas analysis (e.g. method/sample lists/data processing/results etc.).
Many thanks
Marc
Hello Marc
send email, i want more details, I think that i can help you.
Re: CP-4900 Micro GC Software
Posted: Wed Jun 26, 2019 3:48 pm
by marc00polo
Hi,
Thanks for the replies. I spoke to Agilent and they were able to send me the installation files for Galaxie, so looks like the problem is solved now. Will let you know, if not.
Thanks
Marc
Re: CP-4900 Micro GC Software
Posted: Sat Aug 29, 2020 7:52 pm
by kkakosim
I have a similar issue with my CP-4900. I followed the instructions for the installation of Galaxie v1.9 and the GC controller. I am able to setup and connect the system via the Configuration Manager. The CP-4900 communicates and sends/receives the settings. Note that the two channels/columns are colored red, everything seems ok and the CP-4900 is Ready. I do not if this ok and indicates an issue.
When I open the Galaxie software the system does not appear at all, for any user. I have only one system so I do know if it is a problem with the CP-4900 or the Galaxie.
Does anyone have any idea about what can be the issue? I am completely newbie on the matter.
Forgot to mention, that I also tried with the local distributors (I am based in Qatar) with no luck. They stopped trying way earlier than I reaced.
Re: CP-4900 Micro GC Software
Posted: Wed Feb 07, 2024 5:56 pm
by samueldd
Hi all
I have the same issue trying to find the installation software. When I arrived at my lab the media was already lost. I contacted my local agilent contact with no luck, they don't support anymore. Can you please help me find the drivers and the software for the CP-4900?
my e-maill is
brunolemos@ipt.br
thanks