Flow rate for Coulochem III Detector
Posted: Thu Jan 03, 2008 4:00 pm
Dear LCForum Members,
I just trying Coulochem III detector (DC & pulse & scanning Mode),
commected to Ultimate 3000 Microchromatography System.
In my method I used 2.1 mm HILIC column and flow of 400 ul/mim.
I do not sure if such low flow is harmfull for this detector.
sincerely
Kazimierz H. Kozlowski
I just trying Coulochem III detector (DC & pulse & scanning Mode),
commected to Ultimate 3000 Microchromatography System.
In my method I used 2.1 mm HILIC column and flow of 400 ul/mim.
I do not sure if such low flow is harmfull for this detector.
sincerely
Kazimierz H. Kozlowski