Thermo LXQ and Waters Alliance 2695 + 2487 connexion

[pac74631]

Hi everybody

I would like to know if anyone has connected a MS Thermo LXQ with a LC Waters Alliance 2695 + Waters UV 2487.
Does anyone know if Xcalibur can control both equipments?
Can at least Xcalibur use a detector output to work with both MS and UV signals in the same software?

Thanks

[MS made easy]

The device drivers for the Waters 2695 and the 2487 are available for all Thermo mass spectrometers running Xcalibur 1.3, 1.4 and 2.0 software. They are available for download on the technical support web site. The UV data trace is integrated into the data system and is handled identically to any other signal.