Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Thermo LXQ and Waters Alliance 2695 + 2487 connexion

http://www.chromforum.org/viewtopic.php?t=7470

Page 1 of 1

Thermo LXQ and Waters Alliance 2695 + 2487 connexion

Posted: Wed Dec 12, 2007 11:20 am
by pac74631
Hi everybody

I would like to know if anyone has connected a MS Thermo LXQ with a LC Waters Alliance 2695 + Waters UV 2487.
Does anyone know if Xcalibur can control both equipments?
Can at least Xcalibur use a detector output to work with both MS and UV signals in the same software?

Thanks

Thermo LXQ and Waters Alliance 2695 + 2487 connexion

Posted: Thu Dec 13, 2007 4:59 pm
by MS made easy
The device drivers for the Waters 2695 and the 2487 are available for all Thermo mass spectrometers running Xcalibur 1.3, 1.4 and 2.0 software. They are available for download on the technical support web site. The UV data trace is integrated into the data system and is handled identically to any other signal.
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/