Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Lack of inlet pressure

http://www.chromforum.org/viewtopic.php?t=7105

Page 1 of 1

Lack of inlet pressure

Posted: Mon Oct 15, 2007 12:01 am
by indyaj
I have a fairly new 6850. Agilent just came in and did a PM on it and now I get no inlet pressure. I get and inlet flow though. Does anyone know the problem?

Tony

Posted: Mon Oct 15, 2007 4:17 am
by Consumer Products Guy
If you have flow to the inlet and no pressure, then you have an inlet leak.

Posted: Mon Oct 15, 2007 2:31 pm
by AICMM
Indyaj,

Are you getting an EPP shutdown on the 6850?

Best regards.

Posted: Wed Oct 17, 2007 7:11 pm
by duantech
Try to replace the o-ring seal (the plastic one between liner and septum). I had a similar problem and caused automatic shutdown. Solved by replacing the seal.

goog luck

duantech
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/