Resolution calculation with Empower 2
Posted: Mon Jul 02, 2007 12:05 pm
Hi,
I don't have any experience with Empower.
While developing a method on a Waters alliance, I wanted to calculate resolution for the critical pair, but Empower 2 (Build 2154) refuses to calculate system suitability when "baseline resolution is not achieved" (from help, but i believe it can be read as resolution smaller than unity since there are many other peaks in my chromatogram not separated well but resolution is calculated). My pair is integrated with a drop line. When I manually integrate, resolution is calculated but couldn't find an easy way.
Any suggestions?
Thanks,
Bulent
I don't have any experience with Empower.
While developing a method on a Waters alliance, I wanted to calculate resolution for the critical pair, but Empower 2 (Build 2154) refuses to calculate system suitability when "baseline resolution is not achieved" (from help, but i believe it can be read as resolution smaller than unity since there are many other peaks in my chromatogram not separated well but resolution is calculated). My pair is integrated with a drop line. When I manually integrate, resolution is calculated but couldn't find an easy way.
Any suggestions?
Thanks,
Bulent