Alternative HPLC columns

[JJZ]

Hi, there:

I am looking for an alternative HPLC column for Mac-Mod ACE Phenyl, which has 10nm pore size, 300square meters per gram surface area, and 9.5% Carbon load. It is also endcapped. I would appreciate it if you could recommend anything similar.

Best regards,

JJZ

[Uwe Neue]

Several manufacturers have phenyl columns. Waters has several phenyl columns. However, as it is the case with C18s, phenyls are usually not completely alike, even if the numbers look the same.

[SSGG]

I am also looking for an alternative column, to Dionex's DNAPac PA100. Does anyone have any recommendations?

I want to do an anion-exchange separation of a protein, pI 4.6. So far I cannot get a good separation with Tosoh's TSK gel DEAE 5PW column, because the protein is being retained too strongly by the stationary phase (carryover lasts sevaral injections).

I read of a method that uses the DNAPac, and I want to try it out, but the column is too expensive.

[Thunderbunny]

For the Ace Phenyl I would recommend the Varian Pursuit Diphenyl.

Do you have a problem with the Ace?

[Rafael Chust]

Phenomenex recommends as direct alternatives Gemini C6-Phenyl to Ace Phenyl and Asahipak IEC to Dionex DNAPac.

[Bryan Evans]

We also carry phenyl columns. If you are interested, feel free to contact me. Thanks.

[Thunderbunny]

Phenomenex recommending Gemini eh? Funny that....

[Rafael Chust]

I think I lost something in translation... are bunny trying to be funny?

[Thunderbunny]

Not trying to be funny at all, just not surprised that a manufacturer would recommend their own column.

I don't make or sell columns, only use them so I hope to give impartial advice.

[Rafael Chust]

Of course this is not the place or ocasion for private discussions but in previous posts you have made mentions similar to mine concerning products from Varian, Daicel, etc.

I do not know how you assume YOUR opinions are impartial and mine not... I expect to see your politically correctional comments towards other people clearly connected with a manufacturer in this forum...

By the way, I do not see any problem for someone to recommend his (or his employer) product as he/she would be convinced it is the best solution. I would not bang political correctness flags to this! (Although I must admit that to me is a bit annoying to have someone continuously using this forum as a marketing / selling tool...).

Of course I have my personal simpathy with some manufacturers, as you and any human being certainly have. I prefer American and German cars rather than Japanese and French ones... so waht?!

[tom jupille]

From the "Policies" statement of Chromatography Forum:

Participants are welcome to discuss specific products or services by name. If you have a product which solves a posted problem, go ahead and talk about it, but material that actively promotes the sale of a product or solicits participants will be deleted from the message board.

Just to be clear on what this means: writing about or recommending your own product is perfectly acceptable, so long as:

a. it is clear that it is your product.
b. it is presented in the context of a genuine solution/answer to a question.
c. it is presented in a helpful and professional manner.
d. you don't malign another product in the process.