Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

THERMO, TRACE GC ULTRA WITH PROBLEM

http://www.chromforum.org/viewtopic.php?t=27520

Page 1 of 1

THERMO, TRACE GC ULTRA WITH PROBLEM

Posted: Thu Oct 15, 2015 2:16 pm
by rloyola
I have a Trace GC ultra coupled to a TSQ-XLS, from Thermo.

My Trace GC ultra is not working because have an electronic board burned. The electronic board is the ANALOF FEEDBACK PCB, Part number 23648340. I am trying to find anyone that have a old board.

I think that the problem of my GC is related with that, because when I turn ON the instrument the screen show me the next message MB EEPROM IS BAD.

Can anyone give me a suggestion please?

Re: THERMO, TRACE GC ULTRA WITH PROBLEM

Posted: Tue Oct 20, 2015 10:21 am
by CE Instruments
No country info. Did you try Thermo ? Are you sure that swapping the board will not result in the same board burning out again as there could be an issue on the power supply ? CE Instruments can service these GCs and we have some stock boards to support our customers. I guess however that you are not UK based ?
More info. required :wink:

Re: THERMO, TRACE GC ULTRA WITH PROBLEM

Posted: Tue Nov 03, 2015 10:02 pm
by Mikaelalfredsson
Is this a PTV injector system?

If so solvent valve can be the cause of burning the board
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/