Waters Empower and AutoArchive

[shaun78]

I might be a little crazy, but I thought I remembered reading somewhere that Waters recently allowed AutoArvhive to be installed on an Enterprise Empower environment. I believe this was a new feature of Empower 3 or Empower 3 FR2.

As luck would have it I have no idea where I read this and am unable to locate any information regarding this via internet searches.

Anyone here have any knowledge of this?

Thanks in advance...

[artsjeroen]

AutoArchive is a separate option for Empower software and it is available for Empower Personal, Workgroup, and Enterprise configurations.

A manual is given here: https://www.waters.com/webassets/cms/su ... 4207ra.pdf

[artsjeroen]

This however is not available for Empower 3, I think NuGenisis is the alternative.
http://www.waters.com/waters/library.ht ... =134847840

[beyondtheprize]

Nugenesis is the only option to backup and archive data automatically. However, it should be noted that Waters broke the data adapter from E3 FR2 to NG8 SR1. You must "upgrade" to FR1. However, this isn't a so much of an upgrade as it is a complete re-install and configuration of the application, requiring re-validation.