Page 1 of 1
HPLC conductivity detector forWITHOUT using an A/D converter
Posted: Wed Aug 12, 2015 3:09 pm
by KM-USA
Does anyone know if there's an HPLC conductivity detector manufactured that can hook up to an Agilent 1100/1200 HPLC system WITHOUT using an A/D converter? Boss doesn't like A/D converter we have, apparently. Thanks.
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Wed Aug 12, 2015 4:23 pm
by DR
Does the boss like strip chart recorders, scissors and analytical balances?
What does he like?!?
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Wed Aug 12, 2015 6:32 pm
by KM-USA
Boss would like if Agilent made a conductivity detector.
Conductivity detectors we have work fine on A/D with the Chemstation.
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Thu Aug 13, 2015 2:39 pm
by CE Instruments
Tell him to scrap all the kit and replace with Thermo then he could have a single vendor solution
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Thu Aug 13, 2015 4:43 pm
by KM-USA
Tell him to scrap all the kit and replace with Thermo then he could have a single vendor solution
Can't: most of the Agilent stuff is new, plus we have electronic security software (OpenLab). We've never used Thermo HPLC or software, so I have no opinion on that. But the Agilent systems are very reliable, 30 years experience with them.
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Mon Aug 17, 2015 3:49 pm
by CE Instruments
So UK humour kind of missed the target.
Contact Agilent, OpenLab claims compatibility with other vendors kit and Thermo/Agilent agreed to exchange control protocols back in 2006. Get a Dionex detector for your 1100/1200. I'm sure Thermo could control all your Agilent kit so it's got to be worth contacting Agilent ??
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Fri Aug 21, 2015 2:26 pm
by Khanom
Dear KM,
The Cecil CE 4710 conductivity detector has +/- 1V analogue outputs, it may be connected to third party systems, provided the third party systems have +/- 1V A/D converters.
Re: HPLC conductivity detector forWITHOUT using an A/D conve
Posted: Sat Aug 22, 2015 11:10 am
by CE Instruments
Does anyone know if there's an HPLC conductivity detector manufactured that can hook up to an Agilent 1100/1200 HPLC system WITHOUT using an A/D converter? Boss doesn't like A/D converter we have, apparently. Thanks.
Another miss
He wants digital control no a/d