Gilson 215 system setup
Posted: Thu Feb 26, 2015 4:20 pm
Hi all,
we purchased a used Gilson 215 handling system which was connected to a Dionex HPLC. The Dionex HPLC is running fine using Chromaleon 6.8 software.
Unfortunately the Layout of the Gilson system is fixed in some binary files ending *.gty.
For modifiying the Zones, coordinates and other stuff, one would need a software called TrayEditor which cannot be provided by Gilson (end of support) or Thermo/Dionex (nobody knows about it).
Is anybody out there familiar with this kind of file/setup and can help me setting up a new layout for our system. If the software itsself is available somewhere, we would like to purchase it to enable us to generate our own layouts in the future.
So far none of our contacts came up with something reasonable.
Please contact me in case you need more information.
Cheers
we purchased a used Gilson 215 handling system which was connected to a Dionex HPLC. The Dionex HPLC is running fine using Chromaleon 6.8 software.
Unfortunately the Layout of the Gilson system is fixed in some binary files ending *.gty.
For modifiying the Zones, coordinates and other stuff, one would need a software called TrayEditor which cannot be provided by Gilson (end of support) or Thermo/Dionex (nobody knows about it).
Is anybody out there familiar with this kind of file/setup and can help me setting up a new layout for our system. If the software itsself is available somewhere, we would like to purchase it to enable us to generate our own layouts in the future.
So far none of our contacts came up with something reasonable.
Please contact me in case you need more information.
Cheers