Chromatography Forum

Posted: **Mon Jan 19, 2015 8:00 pm**

I was watching the millivolt reading on the 6890GC as the peak eluted and the reading was 2650mv.

Now the pA reading on my Empower 3 display software screen is almost the same 2640.

Interesting because I did not think they would be so close.

Posted: **Tue Jan 20, 2015 9:01 am**

1 Isn't it the units the other way around: pA unit (correct) on the GC and mV unit (incorrect) on Empower?
2 Actually, they should be exactly the same since Three is only one AD-converter. (However due to update issues when you are tracing the numbers they will not be in practice.)

Chromatography Forum

pA reading the same as Agilent mv reading

pA reading the same as Agilent mv reading

Re: pA reading the same as Agilent mv reading