Chromatography Forum

On my Agilent 7890A the nut on the inlet got cross threaded and required a lot of persuading to come off again. During the removal process one of the two gas lines into the inlet got severed. The best I can find is this:

http://www.chem.agilent.com/Library/sel ... 5451EN.pdf

Part G3430-40035

The turn top. Does this part include the gas tubing or is it just the inlet valve, if you see what I mean? It isn't very clear and I cant get a resonse from agilent.


Any help much appreciated.

On my Agilent 7890A the nut on the inlet got cross threaded and required a lot of persuading to come off again. During the removal process one of the two gas lines into the inlet got severed. The best I can find is this:

http://www.chem.agilent.com/Library/sel ... 5451EN.pdf

Part G3430-40035

The turn top. Does this part include the gas tubing or is it just the inlet valve, if you see what I mean? It isn't very clear and I cant get a resonse from agilent.


Any help much appreciated.

Probably this picture will be more helpful:
http://tinyurl.com/turntop

Yes the top weldment includes the tubing.