Page 1 of 1
Agilent 1100 prep and Masslynx
Posted: Mon Feb 10, 2014 11:57 pm
by MedPrep
I have an Agilent 1100 prep that I want use with a Micromass Platform LC MS and to control the fraction collection triggering using MassLynx V4.0... is this possible?
Re: Agilent 1100 prep and Masslynx
Posted: Wed Mar 05, 2014 3:00 pm
by andy_s
Any joy with this - by Masslynx or other means??
Re: Agilent 1100 prep and Masslynx
Posted: Mon Jun 23, 2014 8:37 pm
by Phillhere
I have been reading up on this a lot lately... it should be possible.
we are not quite at the interfacing part yet, as we have been gradually rebuilding / fixing up an old Platform LC.
think we are nearly there, except have got snagged with "AI cannot identify target transputer".
transputer registers ok 0 0 on the internal readouts, but will not communicate with PC (TDAT).
when we get past this I will let you know if we achieve interfacing the PC /1100 and platform.
Re: Agilent 1100 prep and Masslynx
Posted: Thu Nov 06, 2014 7:16 pm
by MedPrep
We have been using another system for now but are still very interested in knowing the answer to this.