Sequential sequences on ChemStation

[biocat]

Is it possible to submit multiple sequential sequences in ChemStation? It's a no brainer on EZStart but I don't see how to do it with ChemStation. Thanks!

[shaun78]

Granted, it has been a very long time since I used ChemStation ("A" days of the software). But, unless Agilent changed something, there is no way to queue sequences.

[KM-USA]

The newer Chemstation has a Sequence Queue function.

On older versions just set up as one Sequence, with a specified wait time to equilibrate in between changes of Method.M.

[nimbi63]

You didn't mention the revision of ChemStation you are using. This is a very important bit of info.

Many years ago (in the 'A' revision) a macro was added to the \UCL\LC_UCL\Macros for 'chaining sequences'. Check your ChemStation software disk for this folder, and look in the 'Index' to see if it exists on your revision.

[biocat]

Thanks all for the info. The version is B.03.01-SR1 [317].

[nimbi63]

OK, on that revision you would have to use the 'chain sequence' macro. It's on B.03.01 CD2 in \UCL\LC_UCL\Macros\10.