Chromatography Forum

Anyone interested in an Agilent 5972A MSD, working condition? The computer/software would be included, runs on Windows 95. Our department decided to decommision this MSD and use the 6890 as a GC-FID on the OpenLab network using hydrogen carrier gas to decrease our use of helium, so the MSD is available, but no GC.

This MSD is located in USA, and the only thing that doesn't work is the vacuum gauge accessory.

Where is it located? Is the rough pump included?

Thanks,
Cathy

I am interested. How much?

Sorry, forgot to check this topic.

The 5972A is in USA, we disconnected it so we could use its 6890A on OpenLab system as a GC-FID (it already had an FID with it). The 5972A has the heated transfer line; there is a quite-large Edwards rough pump attached to it, but if that vacuum pump can also work with our 5973A and 5975A MSDs, the boss would probably want to retain that.

We would be open to any reasonable offer, and would let it go for few dollars.

How about $2500 for t he 72 MSD?

How about $2500 for t he 72 MSD?

I will run that number by the boss. That would be without the rough pump as detailed in earlier post, correct?

Yes, that offer is just for the MSD, no rough pump. We would also need to make sure that we get the transfer line.

Yes, that offer is just for the MSD, no rough pump. We would also need to make sure that we get the transfer line.

Yep, the heated transfer line is included.

Alex: Supervisor says OK, and I'm going to send you an E-mail so we can discuss that way.

Update: My E-mail system wouldn't send to alex@aimanalytical.com, so I'm trying info@aimanalytical.com

Hi, I never received any email?

Maybe try my other company email alex@mercury-usa.com

Hi, I never received any email?

Maybe try my other company email alex@mercury-usa.com

Yeah, resending to above E-mail address. Other was sent March 28th.

sold