Inline filters compatible with Dionex columns?

[Nell001]

I have a Waters UPLC and usually use a waters inline filter before the column but they are not compatible with Dionex as the thread buckles.

Can anyone suggest another inline filter that may be compatible with Dionex columns?

[Nell001]

Oh and preferably THF compatible also

[HPLCaddict]

You're referring to the Acquity UPLC inline filter unit? The holder with 0.2µm filter discs? Why should it not be compatible with Dionex columns? I've used it on non-Waters UHPLC-Systems on a range of non-Waters columns without problems (no Dionex column, though ). You just have to make sure you'll use a fresh new holder for each column of different manufacturers since the ferrule is swaged on the connection tubing the first time you use it.
There are inline-filter solutions from other manufacturers, but I don't have any experience with them. We use the SecurityGuard Ultra (? I think that's the name, would have to check) from Phenomenex for some methods. This is not a plain filter but a universal guard column, though.

Ah, yes, I'm not affiliated with Waters or Phenomenex .

[Nell001]

Thanks for the feedback, I will try using a fresh inline filter on the column and see if that works, I did try and put the inline filter on the sample outlet of the rheodyne injector, which seems to be working.