Page 1 of 1
Varian GC 450 PIONA analyzer boot problem
Posted: Tue Sep 25, 2012 12:50 pm
by mbachujames
Our Varian GC 450 PIONA analyzer cannot boot. when the "ON" button is pressed, the booting lights ( Not ready-Ready-Run-Error) continues indefinitely hence the equipment cannot be ready. can any body tell me how to correct this problem?
Thank you,
James
Re: Varian GC 450 PIONA analyzer boot problem
Posted: Tue Sep 25, 2012 8:13 pm
by chromatographer1
Can your vendor help you?
Go to the source for the best advice rather than a stranger on the Internet.
best wishes,
Rod
Re: Varian GC 450 PIONA analyzer boot problem
Posted: Thu Sep 27, 2012 8:18 am
by Johnny Rod
if you have any other network adapters or cables then pull them out and reboot the PC and GC. The BOOTP service connects the two and can get confused. Once a connection is made, you can reconnect the other stuff. We have this problem with a 430 on Galaxie, I'm sure proper subnetting would figure it out!