Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Xcalibur driving Agilent LC 1200's query

http://www.chromforum.org/viewtopic.php?t=20443

Page 1 of 1

Xcalibur driving Agilent LC 1200's query

Posted: Fri Aug 03, 2012 3:10 am
by goffreddo
Hello all

we are currently using an LTQ XL (Xcalibur 2.0.7 under Windows XP) and are interested in upgrading to a Velos pro or a Velos Orbitrap – does anyone know any of the following
1. What version of Xcalibur ships with the Velos?
2. Have Thermo started using Windows 7 to operate it?
3. Will that version of Xcalibur still drive our Agilent 1200LC?

thanks for your considerations

Re: Xcalibur driving Agilent LC 1200's query

Posted: Wed Aug 08, 2012 9:27 am
by leadazide
Xcalibur will be 2.1 SP1 or 2.2 SP1

It will be running under Win7 32bit

A lot of 1200 series modules are support with the shippet version of Xcalibur but I will not promise that all modules are supported.

Please contact your local Thermo office and ask specifically to which 1200 modules you what to use.

Hope this was helpful
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/