Page 1 of 1
Connecting a 6890 to Empower
Posted: Tue Jul 17, 2012 7:51 pm
by JGK
Does anyone have a copy of the ICS patch to configure a Serial Port for communication with a 6890 GC.
I've tried the Waters website but they only have the 7890 version listed.
If you do contact me at
gknox@pos.ca
Re: Connecting a 6890 to Empower
Posted: Tue Jul 17, 2012 9:00 pm
by JGK
Please Ignore this. I was provided incorrect information.
Apparently I need a bespoke serial card & drivers.
Re: Connecting a 6890 to Empower
Posted: Thu Jul 19, 2012 9:09 am
by Johnny Rod
If you are using the octopus cable and card, these are available more cheaply from the manufacturer, Waters don't like to tell you that.
Re: Connecting a 6890 to Empower
Posted: Thu Jul 19, 2012 6:54 pm
by JGK
If you are using the octopus cable and card, these are available more cheaply from the manufacturer, Waters don't like to tell you that.
That may be, but I will still need the proprietary drivers to allow communication with the GC.
Re: Connecting a 6890 to Empower
Posted: Fri Jul 20, 2012 7:58 am
by Johnny Rod
Okay maybe not such a useful piece of info if you only have one acquisition server!