Page 1 of 1
problems with system in hplc beckman system gold
Posted: Fri Apr 20, 2012 9:28 am
by komosa
hi, after turning on my hplc i get report "System 1 is running". it says that i can choose "abort" or "wait" but no matter what i choose nothing is changing. i turned it off a few times and its still the same. I will be grateful for any ideas how to resolve my problem
Re: problems with system in hplc beckman system gold
Posted: Fri Apr 20, 2012 7:51 pm
by skunked_once
Which version of System Gold?
It's been a while since I ran System Gold but I have had the same problem. Click on the "abort" command for the sample table, method, etc. then close System Gold and restart. If that doesn't work, the next step is to repeat and turn off then restart the computer. If that doesn't work, turn off the computer and all of the HPLC components before restarting. Hope this helps.
Re: problems with system in hplc beckman system gold
Posted: Mon Apr 23, 2012 10:35 am
by komosa
hej, as I wrote before-i tried restarting, i chose abort a few times and nth. but today i decided to reset detector and pumps and its working
anyway thx for advices, take care