Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Agilent cable- making my own

http://www.chromforum.org/viewtopic.php?t=18715

Page 1 of 1

Agilent cable- making my own

Posted: Mon Jan 09, 2012 10:32 am
by osp001
I need an Agilent 19242-60500 cable, used connect the 19257A (RS-232c) board to a computer. The pin-outs for the RS-232c cable are found here, on page 36:

http://www.willstein.com/Resources/Chro ... Manual.PDF

However, I don't have the 12-pin connector that plugs into the board. Anyone know where I could find one of these?

Re: Agilent cable- making my own

Posted: Wed Jan 18, 2012 2:12 pm
by tlahren
Not sure of the specific one you are looking for but you could try http://www.digikey.com. Agilent is one of their larger customers and you may be able to find the connector they provide Agilent. Their tech support people are also very knowledgeable and may be able to help track down a part if you can explain it over the phone.

Ty
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/