Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Using a calibration curve in chem station Rev. 4.01

http://www.chromforum.org/viewtopic.php?t=18139

Page 1 of 1

Using a calibration curve in chem station Rev. 4.01

Posted: Thu Nov 03, 2011 7:19 pm
by mvirgo9284
I've made a multi-level calibration curve in chemstation with three points. I have two unknowns to analyze. The only way that I know to view the calculated amounts of these two samples is to print a report to the screen. I have ESTD% and detailed selected in the specify reports. When I print to screen it will only show me the results for the first sample in my run which is DMSO. Does anyone know how to properly view the quantitation results for this type of calibration?

Re: Using a calibration curve in chem station Rev. 4.01

Posted: Tue Jan 24, 2012 1:37 pm
by smack
I am very new to this version of Chemstation and I have so many problems with the calibration. The system is not intuitive at all. I am also eagerly waiting for a response...
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/