Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Transfer line

http://www.chromforum.org/viewtopic.php?t=17631

Page 1 of 1

Transfer line

Posted: Thu Sep 08, 2011 2:33 pm
by fabienco
Does anybody know where to source a transfer line for connecting a 6890GC to a Varian 320MS?
Thanks

Re: Transfer line

Posted: Fri Sep 09, 2011 10:48 am
by CE Instruments
Why ? A 320 MS if supplied originally would have had a Varian GC, there was no option for an Agilent. If you choose to modify another GC to fit the 320 it should work fine using the contact closure start but there is no alternative transfer line available. Note the 320 MS is designed with an interface to the LHS of a GC , so you will be unlikely to find it easy as the 6890 is designed for interface from the RHS and you will most likely find circuit boards in the way. You could run with the MS and GC running facing different directions but it seems a lot of effort when you should have a Varian GC that you can use ?
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/