Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Varian rough pump oil level

http://www.chromforum.org/viewtopic.php?t=16013

Page 1 of 1

Varian rough pump oil level

Posted: Thu Mar 10, 2011 5:36 am
by Jsup
There's an ongoing debate in the lab as to the proper fill level for oil in our Varian HS 602 rough pumps. I had heard filling roughly half way up the viewing window was protocol and techie X has heard filling it to the top line is protocol. Does anyone have any experience with proper oil filling?

Re: Varian rough pump oil level

Posted: Fri Mar 11, 2011 9:45 pm
by Rick
The upper line indicate the maximum level permits for oil.
The best level is 3/4 between the minimum and maximum level.
All times are UTC
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/