Add menu in Chemstation B.04.02 installed with GC 7890A

[Hossam]

Hi All
I need some help with Chemstation B.04.02 installed with GC 7890A.

I need to create a macro adding additional menu item in the Top Menu “Sequence”.
In this macro I need to add line to run the loaded method and start the analysis of the loaded sample.

Thanks in advance.

[chromatographer]

There is a section on menu commands on page 411 in the Agilent "Macro Programming Guide". Someone posted a link to the guide in Agilent's site recently but I can't find it right now.

[attila01]

Hi
Copy this to the command line (or into the user.mac):

MenuAdd "&Sequence|&Run...", "&Run Method (F5)", "RunMethod"

This starts a single inject.

BTW: you can press F5 anywhere...

Hope this helps: A

[Hossam]

thanks for help, and sorry for dely