Chromatography Forum

Does anybody have the old instruction manual for the RESTEK 6000 Solid State Flowmeter? It is made by Cambridge Scientific Instruments Ltd and was also sold as a CSi 6000 Solid State Flowmeter model 006080.

I do. Do you need any information?

-Scott

I do. Do you need any information?

-Scott

Yes! I want to know if the booklet tells how to calibrate the unit. Is there any way I could get a copy of the instruction manual as a pdf?

-Bill

I just checked the book and was going to upload to Manualslib. Unfortunately, there's no information on calibration. Here's the link to the same flowmeter manual I scanned.

https://www.manualslib.com/manual/13136 ... =16#manual

Ah, that is not my flowmeter. Mine looks like this one and this is the only link I can find that even shows the meter and gives specs. The difference with mine is that it says "RESTEK" in place of "CSI" on the faceplate.
https://advancedlcgcs.com/files/SS_Flowmeters_Sheet.pdf

Here is a link showing what mine looks like and a picture of the manual I am looking for...
https://media.questpair.com/images/mark ... 987732.jpg

Restek updated the unit but kept the "6000" model number. We have the newer version "6000," which is still in their catalog. For it, no information on user calibration. They recommend sending it back to them once a year for PM and calibration.

For what it's worth, I've always found Restek support extremely helpful. The rechargeable battery in our 15+ year old Restek leak detector died. They wouldn't service it, but they did send us the instruction. The swap was more complicated than you'd think. Good for another 15 years!

Yes, I had contacted RESTEK already. They were polite but no longer have any information or help for this older unit.