Page 1 of 1

Agilent 7683 Injector Parts

Posted: Tue Jan 11, 2005 1:14 pm
by xxx
:D

Does anyone know where we could find parts for the 7683 autosampler.
Agilent refuse to sell it,the AS should be exchanged!! :twisted:

Thanks

Samplerparts

Posted: Wed Jan 12, 2005 11:55 am
by Bernd
Hello xxx or Mr.Nobody,

what types of spareparts You need?
We have something on stock.

rgds

Bernd

Posted: Wed Jan 12, 2005 12:04 pm
by xxx
:D
Something for the Agilent 7683?

If ok i need (i wrote the old reference to easier identify the parts)

-A plunger motor assembly (old part 07673-60620)
-A plunger carrier assembly (old part 07673-61210)

Thanks

Posted: Wed Jan 12, 2005 3:24 pm
by Consumer Products Guy
Do you really mean for a 7673 instead (the 7683 would still be supported)? The first part is available online from Agilent http://www.chem.agilent.com/CAG/Cabu/p2_cas_main.asp for $281 USD. For the other one and for "obsolete" parts contact someone like http://www.alphaomegatech.com/.

Posted: Wed Jan 12, 2005 3:42 pm
by xxx
:oops:

I wrote the old references,but i really need spare parts for a 7683 autosampler

Not for a 7673,those are avaible by Agilent.

Posted: Wed Jan 12, 2005 3:44 pm
by xxx
Do you really mean for a 7673 instead (the 7683 would still be supported)? The first part is available online from Agilent http://www.chem.agilent.com/CAG/Cabu/p2_cas_main.asp for $281 USD. For the other one and for "obsolete" parts contact someone like http://www.alphaomegatech.com/.
The 7683 is still supported but Agilent will not the sell the spare parts...you must send the AS to repair :roll:

7683 injector

Posted: Wed Jan 19, 2005 7:56 pm
by Les
I looked at my 7683 and the parts look like the 7673 parts. Have you tried interchanging the parts.... What you do? Drop on the floor and kick it into the corner?

Re: 7683 injector

Posted: Thu Jan 20, 2005 8:42 am
by xxx
I looked at my 7683 and the parts look like the 7673 parts. Have you tried interchanging the parts.... What you do? Drop on the floor and kick it into the corner?
:D if you look better ,you 'll see the connectors are not the same.

Obsolete Parts

Posted: Mon Jan 24, 2005 2:08 pm
by larryz97
You should try Restek, they usually have what I need for the old systems.