A part in the Agilent Injector?

[thohry]

My colleague asks me about a part of an Agilent injector with PN = G2613-60720. I check in manuals but cannot find the part. Anyone know this part and if possible, please give me an illustration.

Thanks.

[krickos]

Hi

What model is it?

Seems like an old one, a PN search draws a blank likewise a search in recent catalogues, this was the closest I got:
G2613-60977
Standard needle support, 7683, Split/splitless
or 530 μm on-column injections.

Tried calling the local Agilent part supplier?

[thohry]

Hi

What model is it?

Seems like an old one, a PN search draws a blank likewise a search in recent catalogues, this was the closest I got:
G2613-60977
Standard needle support, 7683, Split/splitless
or 530 μm on-column injections.

Tried calling the local Agilent part supplier?

Thanks Krickos.
The local supplier seems do not know, probably it's old. I have just checked on the web and that has the description of "Injector PCB Assy".

[gcguy]

These are ourAgilent suppliers, they list the part number so they might know what it is...
https://www.crawfordscientific-secure.c ... =1&x=3&y=5

[Consumer Products Guy]

I believe the G prefix started with 6890 models and 1100 HPLC models. So when you say "old" you're dissin' my 5890 and 1050 units....

[thohry]

I believe the G prefix started with 6890 models and 1100 HPLC models. So when you say "old" you're dissin' my 5890 and 1050 units....

Yes, it's of 6890 and about more than 10 years old. Anyone have a picture of it?

[aldehyde]

I believe the G prefix started with 6890 models and 1100 HPLC models. So when you say "old" you're dissin' my 5890 and 1050 units....

ugh 5890s~