Chromatography Forum

Chromatography Forum is a public discussion group where you can post questions, news, or messages of interest to chromatographers everywhere, but you must be registered to participate (registration is FREE). If you are a registered user, please log in.
http://www.chromforum.org/

Replumbing gas lines GC/MS

http://www.chromforum.org/viewtopic.php?t=20261

Page 2 of 2

Re: Replumbing gas lines GC/MS

Posted: Mon Jul 16, 2012 3:40 pm
by MSCHemist
I rinsed all the 1/4" lines with acetone and replaced the fittings so there should be no more soap.


One last question. Do I need the 400cc moisture trap or is the 120cc we have been using sufficient?

Re: Replumbing gas lines GC/MS

Posted: Mon Jul 16, 2012 6:53 pm
by MSCHemist
Ah great I got the thing all plumbed nice and now it looks like the 6890's EPC is blown. It reads 152 the second the front inlet is turned on or off for that matter.

There are a few places I am finding that repair them. Are they any good?
All times are UTC
Page 2 of 2
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/