-
- Posts: 3
- Joined: Wed Sep 16, 2009 4:17 am
1) First system
Waters 717 plus Autosampler
Waters 600 Controller
Waters Temperature Control Module
Waters 996 Photodiode Array Detector
2) Second system
Waters 717 plus Autosampler
Waters 600 Controller
Waters Temperature Control Module
Waters 486 Detector
Waters 474 Scanning Fluorescence Detector
Waters Carbamate Analysis System
We have waters communication boxes for both systems. We will probably be getting a CE in the near future too. Ideally I would like one box to run all three systems. But if that is not really an option, we will do 1 machine 1 box.
I have experience with millennium, but really found it lacking. We are looking to buy a used computer with a DCS installed, but I am unsure which package to go after.
Both machines are dedicated to a single but different method. Reliability is a big concern.
All input is greatly appreciated.