I have the Cirrus GPC add-on to the Chemstation HPLC software. The Cirrus GPC recognizes the DAD signal, but not the UIB II signal.

I frequently collect ELS and RI detector data using the UIB II interface, because these are non-Agilent detectors. The Chemstation software collects and displays the UIB II signals. But, I cannot get the UIB II signal to export to the Cirrus side for GPC processing.

Also, are there any good YouTube or other sources that teach how to set up and use the Cirrus GPC package? I've read the online Help; but, it is extremely confusing.

Any advice much appreciated.