Empower raw data transfer
Posted: Thu Jan 03, 2019 8:22 am
The HPLC system (alliance 2695) i ran my experiment on got hit by a broken detector lamp and blocked injector tubing. We had to call the technician to fix this HPLC system. Since my experiment required samples to be measured at certain data points a similar system was used (also alliance 2695). The software used is Empower. The new system has its data stored on a different computer than the HPLC system i used before, therefore i am unable to create overlays of chromatograms of different measured time points. In order to make these overlays i need to transfer the data of the used system to the pc of the old system. How do i transfer this data so that it gets placed in the sample or result set list of my project on the pc connected to the HPLC i ran all other analysis on.
tldr: HPLC system broke down, so another system used connected to different pc. software used on both pc's: Empower. Question: How do i transfer sample set/ result set data from one pc to another in order to make overlays.
tldr: HPLC system broke down, so another system used connected to different pc. software used on both pc's: Empower. Question: How do i transfer sample set/ result set data from one pc to another in order to make overlays.