-
- Posts: 36
- Joined: Tue Jun 10, 2008 6:49 pm
- Location: St. Louis
We are trying to upgrade our PC because the video card wasn't working. We bought a new one with Windows 7 for our Varian 3800. It's using MS Workstation V 6.9.3 and combipal has firmware version 2.5.2.
When we use the pal loader on the PC, the communications work great. When we open up the MS Workstation, the combipal begins to alarm a solid alarm.
We don't have a manual here; so, I'm not sure what to look at. The handheld says "remote control" but it appears to be a communications time out.
We didn't have this issue on our previous PC. Is there a set up guide somewhere?
Thanks!
Denise