Empower processing error

Discussions about chromatography data systems, LIMS, controllers, computer issues and related topics.

3 posts Page 1 of 1
Hi

Error in message centre reads
'Method set contains no processing method . Processing request ignored
There is no processing method specified to clear in method set. processing aborted'

how best to avoid this and why has the method set not included processing method ?

thanks
For Empower to acquire data it needs a minimum of a method set with an instrument method embedded in it. Depending on your "Run Mode", if you have this set to Run And Process then no processing will occur if you don't have a processing method in your method set. Put a suitable processing method in this method set and process the sample set using the "Select specified method set" or "Select specified processing method". If set to Run Only, you still wont get any results if you don't process the run with a sample set or method set. Do this and you should get results.
Thanks

Though why does Empower process this then error and create a results set with no results
Then in GMP environment explain why this result set ID is not used

Doesn't sound very compliant to me
3 posts Page 1 of 1

Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 1117 on Mon Jan 31, 2022 2:50 pm

Users browsing this forum: No registered users and 1 guest

Latest Blog Posts from Separation Science

Separation Science offers free learning from the experts covering methods, applications, webinars, eSeminars, videos, tutorials for users of liquid chromatography, gas chromatography, mass spectrometry, sample preparation and related analytical techniques.

Subscribe to our eNewsletter with daily, weekly or monthly updates: Food & Beverage, Environmental, (Bio)Pharmaceutical, Bioclinical, Liquid Chromatography, Gas Chromatography and Mass Spectrometry.

Liquid Chromatography

Gas Chromatography

Mass Spectrometry