Page 5 of 7

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Fri Oct 06, 2017 10:56 pm
by LabGuy89
Hello,

We just received a Waters MicroMass Quattro and have a new PC with MassLynx 4.1 installed. I am trying to get the FTP service running. Does anyone have detailed instructions on how to set up the host PC? I've followed most of this thread, I can FTP in using another PC and the mentioned credentials, but the MicroMass Quattro tries to FTP, it connects for a brief second, then beeps and continuously reboots.

Appreciate any help anyone can provide!

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Mon Oct 09, 2017 6:32 am
by bunnahabhain
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Fri Oct 20, 2017 10:14 pm
by stesimon220
Hello,

I am having the same issues. Can you send me the setup document. My email is stesimon220@outlook.com.

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Thu Nov 02, 2017 8:41 am
by jibualex
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg

Sir I have the same problem with Qattro micro
My email address jibualexcpta@gmail.com. Please send me the instruction file

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Tue Dec 19, 2017 5:15 pm
by peter jones
Hello Jörg, could you send me too the sptep by step instructions as I have the same problem with a Micro-Q-Tof (2003).

Many thanks,

Peter
prhjones@gmail.com

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Fri Jun 15, 2018 1:20 pm
by Ichoman
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg


Hello Jörg,
I am having the same problem with a quattro premier (2004) with the workstation running masslynx 4.0.

Could you please send me the instructions on how to set-up the workstation properly?

My email is: mathias.elgland.phd@gmail.com

Best regards,
Mathias

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Mon Jul 09, 2018 11:00 pm
by valensdiesel1
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg


Hi Jörg,

I am also having issues connecting a Waters mass spec to a PC. I have a copy of MassLynx 4.1, but need help configuring the FTP server, as I am having the infinitely-rebooting embedded PC problem. Can you please send me the instructions? My email is veltman[dot]thomas[at]gmail[dot]com.

Thanks!

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Wed Jul 11, 2018 5:45 pm
by valensdiesel1
Thanks, Jörg!

Your guide got me connected so now masslynx sees the instrument. Now I just have to figure out why the qtof software crashes when I try to turn on the pumping system. May be a compatibility issue since I am on Windows 7 running in XP SP2 compatibility mode. In any event, I appreciate the help, what a champion!

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Thu Jul 12, 2018 6:53 am
by bunnahabhain
Are you running the native English or "international" version of Windows or any other language with added language support?
I remember that the German version of WinXP did not work. Good luck!

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Fri Jul 20, 2018 4:40 pm
by valensdiesel1
I am running the US version of windows 7 ultimate, but my compatibility mode doesn't specify which version of XP (apart from SP2) it is, though I would assume it to be US as well. I talked to Waters tech support and they told me that my copy of masslynx 4.1 is the wrong SCN for proper qtof support and I should look for SCN#633 (or possibly earlier).

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Tue Oct 09, 2018 5:15 am
by untunguntung
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg


Hello, I have same issue here. Can you help me?
I used masslynx 4.1 but epc always RTO (request time out)

can you send step-by-step setup instruction to my email?

Thank you,

regard,
Untung
untungtriadhi@gmail.com

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Wed Jun 12, 2019 3:19 pm
by nadimest
Hey Jörg!

Good ol' posts never die.

I just stumbled upon a Waters MassSpec and I'm struggling to revive it.
Can you send me the step by step instructions?

Best

Nadim
nadimest@gmail.com

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Sun Jul 07, 2019 10:00 pm
by iyanachk
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg


Hello Jorg,

Can you, please email me the instructions of how to set up the ftp server and the connection between the PC and the EPC. I will appreciate it a lot!

My address is iyanachkov at zatapharmaceuticals dot com

Thanks,

Ivan

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Fri Jan 10, 2020 11:37 pm
by ealangille
Hi Jörg,
I am encountering the same setup problems with an Windows XP SP2 system with Masslynx 4.1 SCN 562. I am trying to connect a Quattro Ultima that was reported as in working condition. I would appreciate if you could send the detailed instructions/ notes. My email is ealangille@mun.ca.
Thanks,
Evan

Re: Embedded PC not responding - Waters Quattro Micro

Posted: Wed Feb 05, 2020 5:57 pm
by ealangille
Hi All,
I am almost setup using Jörg's very useful instructions. I had a problem with the connection however to the MS. In order to investigate, I added a video card on the MS EPC and observed the boot process. I am getting to a page with DHCP loading and then the message no PXE-E51: No DHCP or BOOTP offers received. This is followed by no operating system found. Could anyone advise on my next steps? Is there a chance that the CF card with VXWorks is corrupt or something? I am able to ping the epc during a short time between reboots. It resonds several times then hardware error followed by a beep, reset and connection again.
Thanks,
Evan
Follow-up:
As a follow up, I was able to get to a screen with VxLd 1.2....... however this is where the system stalls and resets. I have triple checked all the system settings and am able to access the MassLynx\vxworks folder and script easily. Any advice would be very appreciated.