-
- Posts: 128
- Joined: Wed May 09, 2012 9:30 am
I am trying to figure out how to trend results using Open lab (Ezchrom) Intelligent Report with limited success.
From looking at the 'filtering' on template sheet, 2 tables have trended calibration and samples separately.
The filtering functions differ by 1 value as below :
Expression Operation Value
=Peak_CalibRole = 1
=Peak_CalibRole = 4
=Sample_Type = 1
The only difference is Sample Type operation (<>) between the two tables for filtering
I'm assuming these values come from the sequence/results or methods?
How does this distinguish between calibration standards and samples for example?
I have seen similar report functionalilty in Empower and Chromeleon but struggling to sort this basic trending out
Any information much appreciated