Page 1 of 3
Exporting data generated by chemstation for LC to excel
Posted: Tue Apr 16, 2013 2:26 pm
by ejm087
Hi everyone,
Has anyone solved this?
I have tried several methods. Agilent has an old macro on their website but it was last revised in 1996 and does not work. I also called Agilent's tech support and they basically told me they would look into it but for me not to hold my breath.
I tried a couple third-party macros but they all seem to be formatted for GCs and do not work.
I am running Chemstation for LC REV. B.04.02
1200 series HPLC-ELSD
Before anyone suggests, I know about chemstations's batch function but my issue is that I am not running any standards. My samples are all unknowns. So the batch report is useless to me.
Re: Exporting data generated by chemstation for LC to excel
Posted: Wed Apr 17, 2013 2:08 pm
by nimbi63
I have a macro that uses Dynamic Data Exchange to Excel. You select what you want to send, and ExcelDDE.Mac runs as a post run macro to transfer to an excel spreadsheet.
I don't know of a way to post it on the forum, but would be glad to send a copy via email.
Re: Exporting data generated by chemstation for LC to excel
Posted: Wed Apr 17, 2013 4:16 pm
by ejm087
nimbi63 wrote:
I have a macro that uses Dynamic Data Exchange to Excel. You select what you want to send, and ExcelDDE.Mac runs as a post run macro to transfer to an excel spreadsheet.
I don't know of a way to post it on the forum, but would be glad to send a copy via email.
Hi nimbi63-it is worth a shot. My email is
elijah.magrane@mail.mcgill.ca. Anything special I need to know about executing it or will you send directions along with the mac?
Re: Exporting data generated by chemstation for LC to excel
Posted: Wed Apr 17, 2013 4:41 pm
by nimbi63
I emailed a copy, the zip file contains the instructions.
Re: Exporting data generated by chemstation for LC to excel
Posted: Thu Apr 25, 2013 7:00 am
by Leni
could i please get this also? my email is
lenard21@gmail.comand please send me some directions along the way also...thanks...
Re: Exporting data generated by chemstation for LC to excel
Posted: Thu Apr 25, 2013 12:51 pm
by ejm087
Hi Nimbi.
I installed the file you sent and it works perfectly. Thanks so much, it was exactly what I needed.
Cheers
Re: Exporting data generated by chemstation for LC to excel
Posted: Fri Apr 26, 2013 11:09 am
by Leni
Elijah...send me a copy too please....thanks
Re: Exporting data generated by chemstation for LC to excel
Posted: Mon Apr 29, 2013 8:36 am
by stoooorm88
Hi, i have the same problem. Could you (ejm087 or nimbi63) please send me this macro too?
This would really help me.
philippzech@web.de
Re: Exporting data generated by chemstation for LC to excel
Posted: Tue Apr 30, 2013 11:21 am
by lmh
can I just ask, for interest, what data you are trying to export? Peak-lists, full chromatograms?
If I want peak-lists from Agilent LC-MS data, I use xcms (export the data as .aia, but Agilent haven't done a particularly good job on the export tool).
Re: Exporting data generated by chemstation for LC to excel
Posted: Tue Apr 30, 2013 7:55 pm
by nimbi63
Emailed the macro to both Leni and stoooorm88.
Re: Exporting data generated by chemstation for LC to excel
Posted: Fri May 03, 2013 4:01 pm
by baldy
nimbi63 wrote:
I have a macro that uses Dynamic Data Exchange to Excel. You select what you want to send, and ExcelDDE.Mac runs as a post run macro to transfer to an excel spreadsheet.
I don't know of a way to post it on the forum, but would be glad to send a copy via email.
I actually came to this forum to research this exact question - and would be very appreciative if you could share the macro with me also.
palmer.noel@gmail.com
Re: Exporting data generated by chemstation for LC to excel
Posted: Fri Jun 14, 2013 11:23 pm
by hb3
Could you please send me a copy of the macro to
hb3@roadrunner.com? Thx.
Re: Exporting data generated by chemstation for LC to excel
Posted: Wed Jul 24, 2013 4:08 pm
by cougar
Hi nimbi63,
Could you please send me a copy of the macro to
cougarpro@gmail.com? THX.
nimbi63 wrote:
I have a macro that uses Dynamic Data Exchange to Excel. You select what you want to send, and ExcelDDE.Mac runs as a post run macro to transfer to an excel spreadsheet.
I don't know of a way to post it on the forum, but would be glad to send a copy via email.
Re: Exporting data generated by chemstation for LC to excel
Posted: Fri Aug 02, 2013 9:46 am
by stevenbooth
Hi Nimbi63
Would you be able to email me a copy also? It would really help me out!
stevenbooth@hotmail.co.ukThanks,
Steven
Re: Exporting data generated by chemstation for LC to excel
Posted: Wed Sep 04, 2013 8:17 pm
by silhouette
Hi Nimbi63
Would you be able to email me a copy also?
mail :
emir@albulak.netThanks