-
- Posts: 15
- Joined: Tue Mar 01, 2022 5:34 pm
I run a HP6890-FID and recently switched from peaksimple over to chemstation version A.10.01. I injected my standards for my six compounds of analysis and was able to get some okay calibration curves. My trouble lies in calibrating the internal standard and generating a report with useful results.
Here is my sample prep:
Approximately 50mg of sample is dissolved into 40ml of Internal standard solution. My internal standard solution is ~1g of methyl stearate in 1 gallon of acetone. I am manually injecting right now, so I than inject 1.0uL of the sample solution into the GC for analysis.
Here is my calibration table:
https://drive.google.com/file/d/1Qsl2OB ... sp=sharing
Here is the sample input parameters:
https://drive.google.com/file/d/11sJbZu ... sp=sharing
Here is an example of the output report:
https://drive.google.com/file/d/1Eh81sB ... sp=sharing
Please let me know if any additional info would help, thank you in advance!