Embedded PC not responding - Waters Quattro Micro

Discussions about chromatography data systems, LIMS, controllers, computer issues and related topics.

69 posts Page 5 of 5
Hello,

We just received a Waters MicroMass Quattro and have a new PC with MassLynx 4.1 installed. I am trying to get the FTP service running. Does anyone have detailed instructions on how to set up the host PC? I've followed most of this thread, I can FTP in using another PC and the mentioned credentials, but the MicroMass Quattro tries to FTP, it connects for a brief second, then beeps and continuously reboots.

Appreciate any help anyone can provide!
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg
Hello,

I am having the same issues. Can you send me the setup document. My email is stesimon220@outlook.com.
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg

Sir I have the same problem with Qattro micro
My email address jibualexcpta@gmail.com. Please send me the instruction file
Hello Jörg, could you send me too the sptep by step instructions as I have the same problem with a Micro-Q-Tof (2003).

Many thanks,

Peter
prhjones@gmail.com
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg


Hello Jörg,
I am having the same problem with a quattro premier (2004) with the workstation running masslynx 4.0.

Could you please send me the instructions on how to set-up the workstation properly?

My email is: mathias.elgland.phd@gmail.com

Best regards,
Mathias
bunnahabhain wrote:
Post your e-mail, I will drop you a mail containing the step-by-step setup instructions.

Jörg


Hi Jörg,

I am also having issues connecting a Waters mass spec to a PC. I have a copy of MassLynx 4.1, but need help configuring the FTP server, as I am having the infinitely-rebooting embedded PC problem. Can you please send me the instructions? My email is veltman[dot]thomas[at]gmail[dot]com.

Thanks!
Thanks, Jörg!

Your guide got me connected so now masslynx sees the instrument. Now I just have to figure out why the qtof software crashes when I try to turn on the pumping system. May be a compatibility issue since I am on Windows 7 running in XP SP2 compatibility mode. In any event, I appreciate the help, what a champion!
Are you running the native English or "international" version of Windows or any other language with added language support?
I remember that the German version of WinXP did not work. Good luck!
69 posts Page 5 of 5

Who is online

In total there are 4 users online :: 0 registered, 0 hidden and 4 guests (based on users active over the past 5 minutes)
Most users ever online was 234 on Tue Feb 06, 2018 7:33 am

Users browsing this forum: No registered users and 4 guests