G1600ax EL5207 error
Posted: Tue Aug 22, 2017 9:05 pm
I have been trying for months to figure out what is causing the EL5207 error that causes my CE instrument to be useless. I even obtained the diagnostic macros no help there either. Agilent hasn't been able to help me either.
It started giving me the error in the middle of the night after all runs were completed. Now it does it in minutes.
I went through the adjust offset diagnostic macro and the pressure is able to get to 900 mbar HP 400 mbar vac within 2:00. So I don't think the pump is bad or there is a leak.
The buffer bottles and o-rings look fine. I tried switching bottles.
It started giving me the error in the middle of the night after all runs were completed. Now it does it in minutes.
I went through the adjust offset diagnostic macro and the pressure is able to get to 900 mbar HP 400 mbar vac within 2:00. So I don't think the pump is bad or there is a leak.
The buffer bottles and o-rings look fine. I tried switching bottles.