-
- Posts: 1
- Joined: Fri Dec 10, 2021 9:38 am
I am using ceramic column cutters and working with Fused Silica Capillaries with an ID of 50µm and an OD of 150µm.
So far, the only instructions on how to cut CE columns I've been able to find are from this website:https://kb.mtc-usa.com/article/aa-00404/76/ , however, they are not very clear on the details (like the diameter of the surface or how to find the correct amount of force).
Does anyone have some advice on how to correctly cut capillaries?