-
- Posts: 5
- Joined: Tue Apr 17, 2018 5:21 pm
My Peristaltic rear seal wash pump is not functioning. I have tried changing the properties in chromeleon 7 from interval to automatic. Neither of these will make the pump rotate. on automatic setting I get a warning that the rear-seal leak sensor is malfunctioning. Where is this sensor physically located?
I have powered on and off the pump and it does not start rotating on startup. If I turn the rearsealwashsystem to off in the properties and then switch it to interval or automatic the pump says it is active for a bit but does not physically rotate.
I believe my pump may have failed. If I order the rear-seal wash pump is this something that I would be able to replace fairly easily? Anyone have experience replacing this pump on an IC 5000?
Thanks,
Josh